Simple DIY, organization & cleaning tips for every home — new guides every week

How to Keep a Small Home Warm in Winter Without High Bills

 

Warm cozy small living room in winter with thick thermal curtains, a fabric draft stopper at the door, a thick rug on the floor and soft lamplight, sage green and terracotta, no people, no text

A small home should be the cheapest home to heat — there is simply less air to warm. Yet many small homes feel cold all winter while the heating bill climbs, and the reason is rarely the heater itself. Small homes lose heat fast: thin walls, single-glazed windows, gaps around old doors and a front door that opens straight into the living room. The heat you pay for slips out through those gaps within minutes, so the heater runs longer, the bill grows, and the room still feels chilly.

How to keep a small home warm in winter without high bills comes down to two moves in the right order: stop the heat escaping first, then heat less of the house. Sealing drafts and insulating the windows costs about $36 and takes one weekend, and it works before you spend anything on a new heater — a home that holds its heat needs far less heating. After that, heating only the room you are in and dropping the thermostat by 2°C can cut heating costs by about 10%. Here is the full sequence, in order, starting with the draft test that shows you exactly where your heat is going.

Quick Answer: Seal the drafts first: gaps around doors and windows leak more heat than thin walls do. Add foam tape, a door draft stopper and thermal curtains, then heat only the room you are in and drop the thermostat by 2°C — a change that can cut heating costs by about 10%. The starter kit costs around $36.

Key Takeaways

  • Find the leaks before you spend anything: a hand test on a windy day shows every draft in ten minutes.
  • Seal doors and windows first — foam tape, a draft stopper and a letterbox cover cost under $20 together.
  • Thermal curtains and window film add a second layer of glass without replacing a single window.
  • Heat only the room you are in and close the doors behind you; heating empty rooms is the biggest waste.
  • Drop the thermostat 2°C and warm yourself, not the whole house — layers and a hot water bottle beat a hotter room.

Step 1: Find Where the Heat Escapes

Do not buy anything until you know where the heat is going. In most small homes, half the heat loss comes from a handful of gaps you can find in ten minutes with no tools at all — and fixing the wrong thing first, like buying a bigger heater, just heats the street faster.

1. Run the hand test on a windy day

Wait for a cold, windy day, turn the heating off for half an hour, then walk slowly around the outside walls with the back of your hand held a few centimetres from every edge: window frames, door frames, skirting boards, the letterbox, the keyhole and any wall vents. The back of your hand feels moving air far better than your palm, and a draft you can feel is a draft worth sealing. Mark each leak with a small piece of masking tape so you have a map to work from. Most small homes reveal three or four leaks in the first pass — usually the front door, one window and the letterbox — and those three alone can account for a room that never feels warm. Do the test again after you seal them: the difference you feel with your hand is the difference your heating bill will show.

2. Check the usual suspects first

Small homes share the same weak spots, so check these before you look anywhere else. The front door is first: hold a sheet of paper in the closed door and pull — if it slides out easily, the seal is gone. Next, the windows: run a finger along the frame where it meets the wall, and look for daylight at the corners. Then the letterbox, the keyhole and the cat flap, which are open holes in an outside door by design. Finally, the chimney or fireplace if you have one and never use it: an open flue is a hole in the roof that pulls warm air straight out of the room, day and night. A chimney balloon or a simple board over the opening stops it for a few dollars, and it is one of the biggest single savings in a home with an unused fireplace.

Step 2: Seal the Gaps

Sealing is the cheapest warmth you can buy, and it is almost all renter-friendly. Every fix in this section peels off or lifts away when you move out, and together they cost under $20 — less than one month of the heating they save.

3. Put a draft stopper at every outside door

A draft stopper — a long fabric tube filled with sand or foam, sometimes called a door snake — sits across the bottom of the door and blocks the gap where cold air pours in at floor level. Buy one about 90 cm long for a standard door, or make one in ten minutes from an old pair of tights stuffed with rice and tied at both ends. It costs about $8 ready-made and it works the moment you put it down. Use one at the front door and one at any back door, and add a brush strip — a row of stiff bristles screwed or stuck to the bottom of the door — for about $4 if the gap is more than a centimetre wide. Check the fit at night: if you can still see light under the door, the gap is still open and the stopper needs to be thicker.

4. Stick foam tape around windows and doors

Self-adhesive foam tape is a thin strip of foam with sticky backing that you press into the frame where a window or door closes. Clean the frame first so the tape sticks, cut the strip to length, peel the backing and press it firmly along the edge the window closes against — not the part you can see when the window is shut. A roll costs about $4 and covers two or three windows. Close the window after fitting and check it still latches: if it will not close, the tape is too thick, so switch to a thinner strip. Foam tape lasts one winter and peels off cleanly in spring, which makes it ideal for rentals. For a gap wider than 5 mm, use a V-strip — a folded plastic strip that springs open to fill the gap — instead of foam, which compresses flat and stops sealing.

5. Cover the letterbox, keyhole and vents

A letterbox is a hole in your front door, and on a windy night it blows cold air straight into the hallway. A letterbox brush cover — a strip of bristles that fits inside the flap — costs about $3 and blocks the draft while still letting post through. A keyhole cover, a small metal disc that swings over the hole, costs about $2 and stops the thin whistle of air that comes through the lock. Wall vents need more care: they are there to stop damp, so never block them completely — fit a vent cover with a flap you can open and close instead, and keep it open for an hour a day to let moisture out. Our guide to stopping condensation on windows explains the same balance in detail: seal the drafts, but keep a little controlled airflow so the house stays dry.

Step 3: Insulate the Windows

Windows are the coldest surface in a small home, and in winter they act like a fridge door left open: warm air touches the cold glass, cools, and sinks to the floor. You do not need new windows to fix this — a second layer, even a thin one, makes a real difference, and every option here comes off again in spring.

6. Hang thermal curtains and close them at dusk

Thermal curtains have a thick lining that traps a layer of still air between the curtain and the glass, and that still air is the insulation. Hang them as close to the window as possible and let them reach the floor, so the cold air cannot slip underneath. The rule that makes them work is timing: open them on sunny mornings to let the sun heat the room for free, and close them the moment the sun goes down — usually by 4 or 5 pm in midwinter — before the glass cools the room. A pair costs about $25 ready-made, or you can line existing curtains with a cheap fleece blanket. Keep the curtains clear of radiators: a curtain hanging over a radiator sends the heat straight up behind it and out through the glass, which is the opposite of what you want.

7. Add window film for a second layer of glass

Window insulation film is a clear plastic sheet you stick over the window frame with double-sided tape, then shrink tight with a hair dryer. It creates a sealed pocket of air over the glass — effectively a second pane — and it is almost invisible once fitted. A kit covering three windows costs about $8 and takes twenty minutes per window. Fit it on the inside of the window, pull it smooth before you shrink it, and run the hair dryer evenly so it does not wrinkle. It peels off in spring with no marks, which is why it is the best option for renters with single glazing. Bubble wrap works the same way for free if you have it: spray the glass with water, press the flat side of the wrap onto it, and it sticks all winter — less pretty, but the same insulating air pocket.

8. Put reflector foil behind the radiators

A radiator on an outside wall loses a surprising share of its heat straight into the wall and out of the house. A sheet of radiator reflector foil — aluminium-coated card that costs about $5 for a roll — stuck to the wall behind the radiator bounces that heat back into the room. Cut it to the size of the radiator, fix it with a few strips of double-sided tape, shiny side facing the room, and leave a small gap at the top so air can circulate. It works best on radiators mounted on outside walls; on an inside wall it does almost nothing, because the heat it reflects was already staying in the house. While you are there, bleed the radiators: if the top is cold while the bottom is hot, trapped air is stopping the heat spreading, and a radiator key and thirty seconds per radiator fixes it.

Step 4: Heat Only the Room You Are In

Heating a whole small home to the same temperature all day is the most expensive way to stay warm. A small home heats fast, so you can warm one room in twenty minutes and let the rest stay cooler — and a closed door is the cheapest heating control there is.

9. Zone the heating and close the doors

Heat the room you are in and close the door behind you. A closed door keeps the warm air in one room instead of letting it drift down the hall and up the stairs, and it works with any heating system — central heating, a space heater or a wood stove. If you have thermostatic radiator valves, turn the radiators in empty rooms down to the frost setting (usually the snowflake symbol, about 7°C) so those rooms stay just above freezing and the boiler spends its energy on the room you are using. Never turn radiators fully off in winter: a room left at 5°C can grow damp and mould, and reheating it from cold costs more than keeping it at a low background temperature. In the evening, heat the living room; an hour before bed, switch to the bedroom and close its door — the living room will still be warm enough to cross in the morning.

10. Drop the thermostat 2°C and set a timer

Most homes are heated 2°C warmer than they need to be. Dropping the thermostat from 22°C to 20°C in the living room saves about 10% on heating costs, and after two or three days your body adjusts and 20°C feels normal. Bedrooms can be cooler still — 18°C is the recommended sleeping temperature, and a warm blanket does the rest. Put the heating on a timer instead of leaving it on all day: heat the house for an hour before you wake up and an hour before you come home, and let it switch off overnight. A timer costs nothing if your boiler already has one, and it stops the biggest waste of all — heating an empty house. If your thermostat has a schedule, set it once and leave it: fiddling with it every day is how homes end up heated to 24°C by accident.

11. Warm the person, not the whole room

The cheapest heat is the heat you wear. A thick pair of socks, a fleece layer and a hot water bottle keep you warm at 19°C in a way no thermostat setting can match for the price. A hot water bottle costs about $6, holds its heat for four hours, and warms the bed before you get in — fill it with water from the kettle, never boiling, and never use it in bed with a baby or small child. An electric blanket costs about 3 cents an hour to run and warms the bed, not the room, which is why it beats heating the whole bedroom all night. In the living room, a thick throw over your knees and a pair of slippers do the same job for free. None of this replaces heating — it lets you heat less, which is where the saving comes from.

Step 5: Trap the Heat You Already Have

Once the drafts are sealed and the heating is zoned, the last job is to stop the heat you have paid for escaping overnight. Two small habits and one cheap purchase keep the warmth in the room until morning.

12. Lay rugs on hard floors and close up at night

Bare floors are cold underfoot and they pull heat out of a room. A thick rug — ideally with a felt underlay — adds a layer of insulation over wood or tile, and it makes the room feel 2°C warmer to bare feet even when the thermometer has not moved. A second-hand rug costs about $10 and covers the main walking area of a small living room; put the biggest rug where you sit in the evening, not in the middle of the room. At night, close the curtains, shut the internal doors and pull the draft stopper across the front door — the same routine every evening takes two minutes and holds the day's heat in until morning. If you leave the curtains open for the view, you are heating the night sky through the glass; closed curtains are worth more than the view after dark.

A Worked Example: Warming a Small One-Bedroom Home for $36

Here is the starter kit for a typical small one-bedroom home, and what each piece does:

ItemCostWhat it does
2 fabric draft stoppers$8Block the cold air under the front and back doors
Foam tape, one roll$4Seals the gaps around two or three windows
Letterbox brush cover + keyhole cover$5Closes the open holes in the front door
Window film kit (3 windows)$8Adds a second pane of air over single glazing
Radiator reflector foil, one roll$5Bounces radiator heat back into the room
Hot water bottle$6Warms the bed for four hours for pennies
Total$36One weekend to fit, saves about 10% on heating

That $36 total is the starter kit only — it assumes you already own curtains and a rug, and it buys no new heater. Add $25 for a pair of thermal curtains if your windows face the wind, and skip the window film if you already have double glazing. The fitting order matters: find the drafts on Saturday morning, seal them and fit the film in the afternoon, and hang the curtains before dark. The saving shows up on the next bill: a home that leaks less needs its heating on for fewer hours, and the 2°C thermostat drop alone can cut heating costs by about 10%. The running cost after that is nearly zero — replace the foam tape each autumn, and check the draft stoppers when the first cold snap arrives.

Your Winter Warmth Checklist

Work through this list in order — find, then seal, then insulate, then heat smart — and tick each step off as you finish it:

  • Run the hand test on a windy day and mark every draft with masking tape
  • Check the front door with the paper test, then the windows, letterbox and chimney
  • Fit a draft stopper at every outside door and a brush strip if the gap is wide
  • Stick foam tape around the windows and doors that failed the hand test
  • Fit a letterbox brush cover and a keyhole cover; leave wall vents open an hour a day
  • Hang thermal curtains to the floor and close them at dusk, open them on sunny mornings
  • Fit window film on single-glazed windows and shrink it smooth with a hair dryer
  • Stick reflector foil behind radiators on outside walls and bleed any cold-topped radiators
  • Turn radiators in empty rooms down to the frost setting and close the doors
  • Drop the thermostat 2°C and set the timer for an hour before waking and coming home
  • Put a hot water bottle in the bed and keep a throw and slippers by the sofa
  • Lay a rug on the hard floor where you sit, and close the curtains and doors every night

Where Should You Start?

Start with the hand test and a roll of foam tape. Ten minutes of checking on a windy day tells you exactly where the heat is going, and $4 of foam tape plus an $8 draft stopper fix the worst of it the same afternoon — no tools, no landlord permission, no waiting for a tradesman.

Then fit the window film and hang the thermal curtains before the first real cold snap, because both work best when they are in place before the glass gets cold. After that, drop the thermostat 2°C and give your body three days to adjust — most people stop noticing the difference by day three, but the bill notices it all winter. For the monthly jobs that keep a small home in good shape through the cold months, our monthly home maintenance checklist covers the seasonal tasks to pair with this one — and you can browse every fix on the Home Fixes category page.

Frequently Asked Questions

What temperature should I keep my home in winter?

Aim for 20°C in the living room during the day and 18°C in the bedroom at night. Every degree above 20°C adds roughly 7% to the heating bill, so a home kept at 24°C costs about a quarter more to heat than the same home at 20°C. If anyone in the home is elderly or unwell, keep the living room at 21°C instead — comfort and safety come before the saving.

Do draft excluders really save money?

Yes, because gaps around doors and windows are one of the biggest sources of heat loss in a small home. A draft stopper and foam tape together cost about $12 and can cut the cold air coming in at floor level to almost nothing. The saving shows on the next bill as fewer heating hours, and the payback is usually within the first month of cold weather.

Can I insulate windows in a rental without damaging them?

Yes — everything in this post is renter-friendly. Window film peels off in spring with no marks, foam tape pulls away cleanly, thermal curtains hang from the existing rail, and bubble wrap sticks to glass with plain water. Nothing is screwed, glued permanently or drilled, so you can take the whole system down when you move out.

Is it cheaper to leave the heating on low all day or turn it off?

For most small homes, a timer beats leaving the heating on all day. Heat the house for an hour before you wake up and an hour before you come home, and let it switch off in between — a small home warms up in about twenty minutes, so it does not need hours of background heat. Leaving it on low all day only wins in a very draughty or poorly insulated home, and in that case sealing the drafts saves more than any timer setting.

About the Author

Small Home Hacks shares simple, tested DIY ideas, organization systems and cleaning routines that make everyday living easier — no big budget or big house needed.

Comments (0)

Post a Comment

Search This Blog

Powered by Blogger.

Blog Archive

Ads

Ads

Ads